Sales Advice:+39 02 38011138

If you are buying a Light Stand for your equipment your choice should be made according to the following elements:

Light Stand max and min height
If you need to travel with your equipment you can also take in consideration the folded size

Weight
Keep in mind a too much lightweight stand could be unstable and you could put at risk your equipment. Lightweight stands can be appreciated if you need to shoot outdoor. If this is your case a sandbag is also highly recommended.

Boom arm and boom stands
A boom arm or a boom light stand let you place your light source on a table top and are needed to have the light over your subject without having the stand in front of your lens.

Be careful using those light stands because if your equipment is heavy and the arm is too much extended you risk to bend the boom arm. In any case you have to counterbalance with a sandbag or a weight

In some case you can find a maximum load value. This value can varies upon the arm extension. More the arm is extended more light should be the supported weight

Sale

Phottix Padat 300 Compact Light Stand (300cm)

76,95(92,34 inc. US VAT)

The Padat Compact Light Stand (300cm/118″) features Phottix’s innovative “Fast Assembly Mortise Module (FAMM),” whereby the stand can be quickly and easily connected to other stands for easy transportation. These stands are air-cushioned and compact, yet extend to just under 10ft in height, and will support up to 11lbs.

Atmosphere Aerosol Can Gun

7,50(9,00 inc. US VAT)

The Atmosphere Aerosol Can Gun is a spray can tool that easily snaps onto cans of Haze Spray Atmosphere Aerosol and other standard aerosol spray cans for effortless spraying.

The trigger and pistol grip handle are ergonomically designed to eliminate finger, hand, palm, wrist, and forearm strain and fatigue, while improving spraying accuracy and productivity.

The Can Gun has a universal fit, so it fits all standard spray cans and can be used for other aerosol cans in addition to Atmosphere Aerosol.

Material: Can guns are made from 77% recycled plastic (non-toxic, environmentally preferred, recycled #5 polypropylene).

Warranty: Lifetime when used as instructed

Sale

Phottix Multi Clamp with 1/4-3/8″ Reversible Stud

24,70(29,64 inc. US VAT)

The Phottix Multi Clamp with 1/4-3/8″ Reversible Stud allows for a flash or other accessories to be mounted almost anywhere.

Features:

  • Attaches to any circular bar or pole
  • Special plastic insert for attachment to flat surfaces
  • Mounts flashes anywhere
  • Locking and reversible 1/4” – 3/8” spigot (male)
Sale

Phottix Multi Clamp with Mounting Arm Combo

36,10(43,32 inc. US VAT)

The Phottix Multi Clamp with Mounting Arm Combo allows for a flash or other accessories to be mounted almost anywhere.

Features:

  • Attaches to any circular bar or pole
  • Special plastic insert for attachment to flat surfaces
  • Locking and reversible 1/4″ to 3/8″ spigot
  • 19.5cm mounting arm
Sale

Phottix PX-200 Light Stand

18,05(21,66 inc. US VAT)

Phottix PX-200 Light Stand

18,05(21,66 inc. US VAT)

Rugged and durable Die-cast steel tube of The Phottix PX series PX200 light stand, which are stylish and streamlined corner design with Frosting technology of light stand tube surface.

Features:

  • Rugged and durable Die-cast steel tube
  • Frosting technology of light stand tube surface
  • The top of the three-pronged design of the light stand, it is firmly locked with the extra large screw and the light stand legs to provides more stable loading
  • Base of the light stand adopts a sturdy load-bearing structure
  • Stylish and streamlined corner design
  • Engineering grade plastic material knob light stand section lock
  • Each part of the light stand adopts galvanized thickened screws to effectively prevent rust
  • There is an anti-collision soft rubber ring between the tube sections of the light stand, which acts as a buffer when the tube suddenly drops when unlocked, and protects the lamp holder and photographic equipment
Sale

Phottix Spring Clamp

22,80(27,36 inc. US VAT)

Phottix Spring Clamp

22,80(27,36 inc. US VAT)

The Phottix Clip Clamp provides a hand to hold umbrellas, battery packs, backdrops and whatever else you can think of.

Features:

  • Attaches to light stands with a 5/8” lug
  • Features a 5/8” male internal 3/8” female thread
  • Tight locking mechanism
  • Multitude of uses
Sale

Light & Motion Stella Pro Reflex Professional Light Stand Mount

40,80(48,96 inc. US VAT)

The Professional Light Stand Mount adds the flexibility to mount the Reflex light head or Reflex light with battery to a light stand.

Sale

Phottix Q-drop Collapsible Backdrop Kit (4-color, 1.5m x 4m)

127,30(152,76 inc. US VAT)

The Phottix Q-Drop Collapsible Backdrop Kit is ideal for live streaming, zooming, interviews, portraits, youtube, tutorials, post-production keying, imaginative backgrounds, and product photography.

This 1,5m x 4m backdrop kit is easy to assemble in minutes, is completely self-supporting, and stows away neatly in its own carry case.

The lightweight aluminum background frame has eight sections, and each section can be locked by another’s pipe joint. The ultra-thin frame structure has an elastic cord that runs through it for easy positioning and the flat leg supports attach and secure quickly.

No need for a clamp or light stand. This versatile kit includes a 1,5m x 4m blue/green muslin background as well as a 1,5m x 4m black/white muslin background that simply attaches via the Velcro straps.

What’s included:
• Backdrop frame x 1 • Backdrop stand x 2 • Carry bag x 1
• Backdrop stand gasket x 2 • Backdrop stand screw x 2
• Green / Blue Muslin background x 1 • Black / White Muslin background x 1

Sale

Phottix Stay-Put Sandbag II Large

16,15(19,38 inc. US VAT)

Softboxes and umbrellas are great lighting modifiers but they can easily become airborne from a gust of wind when shooting outdoors. Don’t risk damaging your flashes or Monolights. The Phottix Stay-Put Sandbags II are available in three sizes and hold 3 kg/6.5 lbs, 6 Kg/13.2 lbs, and 10 Kg/22 lbs of weight, and can keep a light stand firmly in place when shooting outdoors or in the studio. These are indispensable accessories. Shoot safely – always use a sandbag.

  • Keeps light stands firmly in place
  • 10kg/ 22lbs payload capacity
  • Useful both indoor and outdoor
  • Saddlebag design and features a double zipper for easy filling
  • Hand strap for transport and a clip and loop on the side that allows multiple sandbags to be connected
Sale

Phottix Stay-Put Sandbag II Medium

13,30(15,96 inc. US VAT)

Softboxes and umbrellas are great lighting modifiers but they can easily become airborne from a gust of wind when shooting outdoors. Don’t risk damaging your flashes or Monolights. The Phottix Stay-Put Sandbags II are available in three sizes and hold 3 kg/6.5 lbs, 6 Kg/13.2 lbs, and 10 Kg/22 lbs of weight, and can keep a light stand firmly in place when shooting outdoors or in the studio. These are indispensable accessories. Shoot safely – always use a sandbag.

  • Keeps light stands firmly in place
  • 6kg/ 13.2lbs payload capacity
  • Useful both indoor and outdoor
  • Saddlebag design and features a double zipper for easy filling
  • Hand strap for transport and a clip and loop on the side that allows multiple sandbags to be connected
Sale

Phottix Stay-Put Sandbag II Small

10,45(12,54 inc. US VAT)

Softboxes and umbrellas are great lighting modifiers but they can easily become airborne from a gust of wind when shooting outdoors. Don’t risk damaging your flashes or Monolights. The Phottix Stay-Put Sandbags II are available in three sizes and hold 3 kg/6.5 lbs, 6 Kg/13.2 lbs, and 10 Kg/22 lbs of weight, and can keep a light stand firmly in place when shooting outdoors or in the studio. These are indispensable accessories. Shoot safely – always use a sandbag.

  • Keeps light stands firmly in place
  • 3kg/ 6.5lbs payload capacity
  • Useful both indoor and outdoor
  • Saddlebag design and features a double zipper for easy filling
  • Hand strap for transport and a clip and loop on the side that allows multiple sandbags to be connected
Sale

Phottix AR35 Boom Arm Stand

9,50(11,40 inc. US VAT)
Phottix AR35 is a foldable studio arm for microphones, LED lights, webcams and many other devices with a 1/4 ”screw connection. The clamp attachment allows stable mounting on tables or other rigid surfaces for optimal height and angle adjustment of the arm.

The maximum height of the arm is 83cm, offering a simple adjustment of the position. The 1/4 “screw connection can be rotated 180 ° and is compatible with microphones, cameras, LED lights and much more. The maximum capacity is 1.5kg.

A microphone clip (diameter 2.2cm to 3cm), table screw attachment (max. 5.5cm) and adapters for 3/8 “and 5/8” screws is included.

Sale

Phottix F-180 Light Stand (H/180cm/71″)

21,85(26,22 inc. US VAT)
Phottix F-180 with a minimum height of 46cm is one of the lowest stands available and weighs just 1kg. The maximum height of 180cm allows optimal positioning for full-length portraits and thanks to the closure with inverted legs, it closes to take up minimal space, excellent for transport to location.

Phottix Padat Carbon Fiber Compact Light Stand (198cm/78″)

88,00(105,60 inc. US VAT)
The Phottix Padat Carbon 198 carbon stand is the lightest light stand in the world with a weight of only 600g . With a closed length of only 66cm it fits into any backpack or travel bag and despite its small size it adapts to any situation with a maximum height extension of 198cm. It is supplied with a standard spigot with 1/4 ”screw .

Features:

  • Maximum height: 198cm
  • Closed length: 66cm
  • Attachment: Screw 1/4 “
  • Maximum support: 1.5kg
  • Weight: 600g
Sale

Phottix-MT-One Mini Tripod

12,35(14,82 inc. US VAT)

Phottix-MT-One Mini Tripod

12,35(14,82 inc. US VAT)
Phottix MT-ONE is a small portable tripod that can be used as a stand for smartphones, microphones and cameras or as a hand-grip (selfie stick type) for video shooting with smartphone and microphone or LED light.
Sale

Phottix Saldo Backdrop Stand Kit (2.8×3.2m)

123,50(148,20 inc. US VAT)

Easy to assemble background kit with bag included

This easy-to-assemble and take-anywhere background kit consists of two Phottix Balance 280 light stands with pneumatic system. Phottix’s Saldo stand series is extremely durable and resistant. Easy to assemble and disassemble and convenient to carry in the bag supplied. The assembled product is 3.2 meters wide and 2.8 meters high

Expan Background Drive Set and Chain

73,20(87,84 inc. US VAT)
Spindle backdrops rolling system with colored plastic chain and counterweight
Compatible with 2.72m cardboard backdrops (max 6Kg) and with accessories (hooks) for Expan.
Sale

Manfrotto 013 – Adapter Spigot

8,21(9,85 inc. US VAT)

Universal 16 mm spigot with double male thread 1/4 ” and 3/8 ”.
Ideal in conjunction with the Superclamp to install light points in positions where it is not possible to use a stand.

Sale

Manfrotto 018 – Caster Wheel Set

51,00(61,20 inc. US VAT)
  • Suitable for a tube with a diameter of 22mm
  • Facilitates the positioning of the light
  • Smooth rolling
Sale

Manfrotto 035 – Super Clamp

25,94(31,13 inc. US VAT)
A true standard in the field of clamps for photographic applications. Ergonomic lever to stop the clamping position safely.

Suitable for a thousand uses: blocking a cable or a backdrop, joining two stands or, in conjunction with a spigot, installing a light point in the most unexpected and inaccessible places!

Sale

Manfrotto 046MC – Expan Set, metal black chain

117,58(141,10 inc. US VAT)
  • Fast and efficient background unrolling mechanism
  • Insert the Expan into the background roll
  • Maximum payload 10kg
  • Includes metal chain
  • To raise / lower the backdrops without moving the support stand
Sale

Manfrotto 047-2 – Two Section Aluminium-Core 2.7m

63,00(75,60 inc. US VAT)

Aluminium core in 2 sections, diameter: 50mm for uncored back round paper. Has adhesive tape for sticking paper. Length: 275cm.

  • It allows you to use the Expan with paper or cloth backgrounds
  • This Alu-Core is 9′ (2.7 m) long
  • Made of aluminium
Sale

Manfrotto 047-3 – Two Section Aluminium-Core 3.6m

83,25(99,90 inc. US VAT)

Aluminium core in 2 sections, for uncored back round paper. Has adhesive tape for sticking on paper. Length: 366cm.

  • It allows you to use the Expan with paper or cloth backgrounds
  • This Alu-Core is 3.6 m long
  • Made of aluminium
Sale

Manfrotto 1004BAC – Master Lighting Stand, Aluminium, Air Cushioned, Black

136,00(163,20 inc. US VAT)
  • 4-section stand with payload up to 9Kg
  • 1004BAC stand attaches to others for easy transport
  • Cushioning protects fingers and equipment
  • Spigot with 3/8 ” thread and removable 1 / 4-20 ” attachment
  • 106cm opening for maximum stability
Back to Top
Buy Studio Light

Shopping cart